| 
 TABER® Industries offers a full line of test
accessories to be used with the TABER® Rotary Platform Abraser (Abrader).
S-16; Steel
Specimen Plates [part# 125563]
4" square, 20
gauge steel with ¼" hole (sold in packages of 10)
S-17; Wood Specimen Plaques [part# 132088-1]
4" square, ¼" birch plywood with ¼" hole (sold in packages of 10)
S-18; Aluminum Specimen Plates [part# 132086]
4" square, Aluminum with ¼" hole (sold in packages of 10)
S-31;
NEMA Glass Standardization Plates [part# 125561]
4" square, 1/8" plate glass with ¼" hole (sold in packages
of 10)
S-34; NEMA Zinc Standardization Plates [part#
125562]
4" square, 0.032" zinc with ¼" hole (sold
in packages of 5)
S-38; Standardization Plates [part#
121257]
4" square, 1/16" plexiglass with ¼" hole (sold in packages of 10)
S-32; NEMA Wheels [part# 125344]
Manufactured
out of rubber, this wheel contains no abrasive grain and is used to apply
S-33 or S-42 sandpaper strips (same as CS-0)
S-33; Sandpaper Strips
[part# 121124]
Backed with a pressure sensitive adhesive,
these coated abrasive strips are attached to the periphery of S-32 (CS-0) resilient
rubber wheels; 12.7mm x 160mm, 360 FEPA, closed coat (sold in packages of 100 or 500)
S-42;
Sandpaper Strips [part# 125564]
Backed with a pressure sensitive adhesive,
these coated abrasive strips are attached to the periphery of S-32 (CS-0) resilient
rubber wheels; 12.7mm x 160mm, 180 ANSI-CAMI, open coat (sold in packages of 100 or 500)
Click here to view other WHEEL
SETS
S-11;
Refacing Discs [part# 121102]
4" diameter,
150 grit abrasive paper for refacing resilient wheels (sold in packages of 100)
ST-11; Refacing Stone, Fine [part# 134640]
Used to reface Taber Calibrase CS-10F abrading wheels; 4" diameter x ¼" thick and ¼" center hole, both sides designated as "fine" (180 grit) and replaces the original ST-11 duplex stone of 80 / 180 grit.
^Top
S-36;
Specimen Mounting Cards [part# 125560]
4 ¼"
square; Mounting card that has one side coated with pressure sensitive adhesive
to hold textiles and other flexible test specimens tightly to the mounting surface,
preventing wrinkles under the abrading wheels. On the plain side of the card,
a test record form is printed. (sold in packages of 50)
S-36-1; Specimen
Mounting Cards [part# 129270]
Same description as
S-36, but round (sold in packages of 50)
S-37; Specimen Mounting Sheets
[part# 12558]
4 ¼" square; Both sides
of smooth card stock are coated with pressure sensitive adhesive, overlaid with
a protective paper that is peeled off prior to use. Mounting sheets are interleaved
between the specimen and the abraser turntable to provide a non-slip attachment
for material specimens such as ceramics, plastics and glass - when no center hole
is present. (sold in packages of 100)
S-37; Specimen Mounting Sheets
[part# 129271]
Same description as S-37, but round (sold
in packages of 100)
^Top
125g
Counterweights [part# 126108]
Counterweight used
with the Taber Abraser to reduce the wheel load by 125 grams (2 pieces)
175g Counterweights [part# 133004]
Counterweight used with the Taber Abraser to reduce the wheel load by 175 grams (2 pieces)
503-0022; Auxiliary Weight (500 gram load) [part# 125769]
Auxiliary weight used with the Taber Abraser to increase the wheel load to 500
grams (requires 2 pieces). Note; actual weight is 250 grams.
503-0023; Auxiliary Weight (1000 gram load) [part#
125770]
Auxiliary weight used with the Taber Abraser to increase the
wheel load to 1000 grams (requires 2 pieces). Note; actual weight is 750 grams.
Replacement Auxiliary Weight Set [part# 125734]
Includes 500 gram load (503-0022) and
1000 gram load (503-0023)
^Top 5130-70;
Replacement Vacuum Set (120V, 60Hz) [part# 121127]
The Abraser Vacuum Unit is manufactured specifically for use with the TABER Abraser,
and incorporates a heavy-duty motor with life-lubricated sealed bearings. Mounted
above a sturdy tank, the motor is kept clear of dust and debris resulting from
your testing.
A flexible suction hose is provided to connect the vacuum
unit with the abraser or other accessory instrument. And a round clean-up brush
aids in cleaning loose debris from the instrument or surrounding work area, includes
flexible suction hose and round brush
5131-70; Replacement Vacuum
Set (230V, 50Hz) [part# 127788]
Same description
as 5130-70
Replacement Paper Filter Bag [part#
114309]
For use with Taber Vacuum equipped with plastic tanks
Replacement Paper Filter Bag [part#
129259]
For use with Taber Vacuum equipped with metal tanks
Cloth Filter Bag [part# 128086]
For use with Taber Vacuum
Filter, Cartridge Type [part# 131680]
For use with Taber Vacuum
Replacement Foam Filter [part#
114310]
For use with Taber Vacuum
Replacement Round Brush [part# 114312]
For use with Taber Vacuum
Replacement
Flexible Suction Hose [part# 114311]
For use with
Taber Vacuum
 Taber
Abraser Clean-up Hose [part# 129280]
Using the vacuum
only feature on your abraser, this simple accessory makes clean-up easy. The hose
mounts to the rear vacuum nozzle opening. The small brush is ideal for cleaning
test specimens, the abraser or your work area without the need to disconnect the
vacuum hose from your abraser.
^Top
S-21;
Extension Nut [part# 121224]
Provides the ability
to test materials ¼" - ½" thick (samples require 3/8"
diameter center hole)
S-19; Rubber Pad [part# 121016]
4 ¼" O.D. pad for Specimen Holder (sold in packages of 5)
S-12; Brush [part# 121103]
Brush for cleaning
Specimen Plates
100-237; Wrench [part# 121095]
For use with hold down ring clamp screw
ETF-11; Step-down Transformer
[part# 121110]
230/115V, 50/60Hz, 1000 watt
^Top
©2004
Taber® Industries 716.694.4000 | 
