| AENOR |
UNE 135203-1 |
Road Marking Equipment, Materials, Laboratory Abrasion Tests – Part 1: Abrasion Resistance, Taber Method |
| AENOR |
UNE 48-250 |
Paint and Varnishes – Resistance to abrasion – Taber method |
| AENOR |
UNE 56-842 |
Kitchen Furniture. Tests for surfacing materials. |
| AENOR |
UNE 56-843 |
Kitchen Furniture. Physical tests. |
| AENOR |
UNE 56-868 |
Bathroom Furniture. Physical test methods. |
| AENOR |
UNE 53-173-92 Part 2 |
Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties |
| AENOR |
UNE EN 13672 |
Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf |
| AENOR |
UNE EN 14431 |
Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture |
| AENOR |
UNE EN 14864 |
Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification |
| AENOR |
UNE 57095 |
Paper and cardboard - Determination of Resistance to Abrasion - Taber Method |
| AENOR |
UN EN 438-2 |
Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties |
| AENOR |
UN EN 13329:E |
Laminate floor Coverings - Specifications, Requirements and Test Methods |
| AENOR |
UN EN 13696 |
Wood and Parquet Flooring - Determination of Elasticity and Resistance to Wear |
| AFNOR |
FD ENV 13696 |
Wood and Parquet Flooring - Determination of Elasticity and Resistance to Wear |
| AFNOR |
NF B 51-282 |
Melamine Faced Particleboards - Determination of Resistance to Abrasion |
| AFNOR |
NF EN 13672 |
Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf |
| AFNOR |
NF EN 14431 |
Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture |
| AFNOR |
NF EN 14864 |
Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification |
| AFNOR |
NF G 37-121 |
Rubber or Plastic Coated Fabric-Determination of the Wear Resistance by Rubbing with two Abrasive Wheels |
| AFNOR |
NF Q 03-055 |
Paper and Board Tests - Determination of Abrasion Resistance of Paper and Board (by Taber Method) |
| AFNOR |
NF T 30-015 |
Paints and Varnishes - Abrasion Resistance Test |
| AFNOR |
NF EN 438-2 |
Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties |
| AFNOR |
NF EN 660-2 |
Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber Test |
| AFNOR |
NF EN ISO 5470-1 |
Rubber or Plastics Coated Fabric-Determination of Abrasion Resistance |
| ANSI |
INCITS 322-2002 |
Card Durability Test Methods |
| ANSI/NSF |
35 |
High Pressure Decorative Laminates for Surfacing Food Service Equipment |
| ANSI/NSF |
49 |
Class II (Laminar Flow) Biohazard Cabinetry |
| ANSI/NSF |
51 |
Food Equipment Materials |
| ANSI/SAE |
Z26.1-1996 |
Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment |
| AS |
AS 2001.2.28 |
Methods of Test for Textiles |
| AS |
AS/NZS 1580.403.2 |
Paints and Related Materials - Methods of Test |
| AS |
AS/NZS AS2924.2 |
High pressure decorative laminates - Sheets made from thermosetting resins - Determination of properties JIS L 1021-11 Textile floor Coverings - Part 11: Determination of wear |
| AS |
AS/NZS 4266.2 |
Reconstituted wood-based panels - Methods of Test - Determination of resistance to surface abrasion (Taber abrasion test) |
| ASTM |
B607 |
Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use |
| ASTM |
B733 |
Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM |
C501 |
Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser |
| ASTM |
C1353 |
Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic |
| ASTM |
D154 |
Standard Guide for Testing Varnishes |
| ASTM |
D1044 |
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM |
D3389 |
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Double-Head Abrader) |
| ASTM |
D3451 |
Standard Practices for Testing Polymeric Powders and Powder Coatings |
| ASTM |
D3489 |
Standard Test Methods for Microcellular Urethane Materials |
| ASTM |
D3730 |
Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM |
D3794 |
Guide for Testing Coil Coatings |
| ASTM |
D3884 |
Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM |
D4060 |
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM |
D4685 |
Standard Test Method for Pile Fabric Abrasion |
| ASTM |
D4712 |
Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM |
D5144 |
Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM |
D5146 |
Standard Guide to Testing Solvent-Borne Architectural Coatings |
| ASTM |
D5324 |
Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM |
D6037 |
Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM |
D7255 |
Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method) |
| ASTM |
E1795 |
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM |
F362 |
Standard Test Method for Determining the Erasability of Inked Ribbons |
| ASTM |
F510 |
Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
| ASTM |
F1478 |
Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method) |
| ASTM |
G 195 |
Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser |
| ASTM |
F1978 |
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| BSI |
BS 3900 |
Paints and Varnishes; Determination of Resistance to Abrasion |
| BSI |
BS DD ENV 13696 |
Wood and Parquet Flooring - Determination of Elasticity and Resistance to Wear |
| BSI |
BS EN 13672 |
Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf |
| BSI |
BS EN 14431 |
Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture |
| BSI |
BS EN 14864 |
Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification |
| BSI |
BS EN 438-2 |
Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties |
| BSI |
BS EN 660-2 |
Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber Test |
| BSI |
BS EN 60903 |
Live working - Gloves of insulating material |
| BSI |
BS EN ISO 5470-1 |
Rubber or Plastics Coated Fabric-Determination of Abrasion Resistance |
| CEN |
EN 13672 |
Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf |
| CEN |
EN 14323 – Section 5.9 |
Wood-based panels - Melamine faced boards for interior uses - Test methods |
| CEN |
EN 14327 |
Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather. |
| CEN |
EN 14354 - Annex D |
Test method for the determination of the resistance to abrasion |
| CEN |
EN 14431 |
Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture |
| CEN |
EN 14864 |
Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification |
| CEN |
EN 14904 |
Surfaces for sports areas – Indoor surfaces for multi-sports uses - Specification |
| CEN |
EN 655 |
Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer -Specification |
| CEN |
EN 1504-2 |
Surface protection systems for concrete |
| CEN |
prEN 14688 |
Sanitary appliances - Wash basins - Functional requirements and test methods (part 5.7) |
| CFFA |
P-101C |
Min Performance Standards for Vinyl Swimming Pool Liners - In-Ground |
| CFFA |
Test 1 |
Standard Test Methods - Chemical Coated Fabrics and Film |
| CFFA |
Test 200 |
Standard Test Methods - Chemical Coated Fabrics and Film |
| CNS |
K6591 |
Method of Test for Polyurethane Athletic Installation Material |
| Daimler-Chrysler |
LP-463KB-21-01 |
Wear Resistance of Trim Materials - Taber Method |
| Daimler-Chrysler |
MS-PP11-1 |
Vacuum Metallizing for Plastic Parts - First Surface Interior |
| Daimler-Chrysler |
MS-PP11-2 |
Vacuum Metallizing - High Wear Resistance- For Plastic Parts - First Surface Interior |
| Dept of Defense |
MIL-A-8625F(1) |
Military Specification - Anodic Coatings for Aluminum and Aluminum Alloys |
| Dept of Defense |
MIL-C-22992E |
General Specification for Connectors, Plugs and Receptacles, Electrical Waterproof, Quick Disconnect, Heavy Duty Type |
| Dept of Defense |
MIL-P 18493 (NAVY) |
Military Specification - Packing, Performed, Carbon; and Carbon Stock, Packing |
| Dept of Defense |
MIL-STD-13231 |
Department of Defense Standard Practice - Marking of Electronic Items |
| Dept of Defense |
MIL-T-28800E |
Military Specification - General Specification for Test Equipment for use with Electrical and Electronic Equipment |
| DIN |
DIN 52 347 |
Testing of Glass and Plastics; Abrasion Test; Method Using Abrasion Wheels and Measurements of Scattered Light |
| DIN |
DIN 53 109 |
Testing of Paper and Board; Determination of Abrasion by the Abrasion Wheel Method |
| DIN |
DIN 53 754 |
Testing of Plastics; Determination of Resistance of Wear by Abrasive Wheels |
| DIN |
DIN 53 799 |
Decorative Laminated Sheets on Basis of Aminoplastic Resins; Test Method |
| DIN |
DIN 68 861 T2 |
Furniture Surfaces: Behavior at Abrasion |
| DIN |
DIN EN 660-2/A1 |
Resilient Floor Coverings - Determination of Wear Resistance - Part 2: Frick-Taber Test; Amendment A1 |
| DIN |
DIN EN 13672 |
Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf |
| DIN |
DIN EN 14431 |
Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture |
| DIN |
DIN EN 14864 |
Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification |
| DIN |
DIN EN ISO 5470-1 |
Rubber or Plastics Coated Fabric-Determination of Abrasion Resistance |
| CEN |
EN 438-2 |
Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties |
| CEN |
EN 660-2 |
Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber Test |
| CEN |
EN 13329:E |
Laminate floor Coverings - Specifications, Requirements and Test Methods |
| CEN |
ENV 13696 |
Wood and Parquet Flooring - Determination of Elasticity and Resistance to Wear |
| Federal |
Test Method Std. No. 191A Method 5306.1 |
Abrasion Resistance of Cloth: Rotary Platform, Double-Head (Taber) Method |
| Federal |
Test Method Std. No. GG-P-455b |
Plates and Foils, Photographic (Photosensitive Anodized Aluminum) |
| Federal |
TT-P-0091D |
Interim Federal Specification - Paint, Rubber Base, Styrene-Butadiene Type, Interior, for concrete floors. |
| Ford |
BN 108-02 |
Resistance to Abrasion - Taber Abraser |
| Ford |
BN 108-04 |
Resistance to Scuffing |
| Ford |
ESB-M99P14-A1 |
Engineering Material Specification - Pad Printing, First Surface Plastic or Painted Plastic, Interior |
| Ford |
WSS-M15P34-B1 |
Engineering Material Specification - Performance, Interior Trim Appliques, High Wear |
| Ford |
WSS-M15P34-B2 |
Engineering Material Specification - Performance, Interior Trim Appliques, Low Wear |
| Ford |
WSS-M15P4-E |
Engineering Material Specification - Interior Trim, Assembly Performance Specification |
| General Motors |
GM2751M |
Automotive Upholstery Fabric |
| General Motors |
GM9515P |
Abrasion Resistance of Organic Coatings (Taber Abraser Method) |
| General Motors |
GM9911P |
Scuff Resistance to Surface Wear |
| General Motors |
GMW 3208 |
Rotary Abrasion Test, Taber Type |
| General Motors |
HN0245 |
Determination of Resistance to Abrasion |
| Hyundai/Kia |
MS300-32 |
Abrasion Resistance of Woven Knits for Automotive Interiors & Trim |
| ISO |
3537 |
Road Vehicles - Safety Glazing Materials - Mechanical Tests |
| ISO |
4586-2/Amd.4 |
High-pressure decorative laminates - Sheets made from thermosetting resins |
| ISO |
5470-1 |
Rubber or Plastics Coated Fabrics - Determination of Abrasion Resistance |
| ISO |
7784-2 |
Paints and Varnishes; Determination of Resistance to Abrasion |
| ISO |
9352 |
Plastics; Determination of Resistance to Wear by Abrasive Wheels |
| ISO |
10074 |
Specifications for Hard Anodic Oxidation Coatings on Aluminum and its Alloys |
| ISO |
ISO 24338 |
Laminate Floor Coverings - Determination of abrasion resistance |
| JIS |
A 1453 |
Method of Abrasion Test for Building Materials and Part of Building Construction (Abrasive-Paper Method) |
| JIS |
H 8503 |
Methods of Wear Resistance for Metallic Coatings |
| JIS |
K 5600 |
5-8 Testing Methods For Paints - Part 5: Mechanical Property
of Film - Section 8: Abrasion Resistance (Rotating Abraser Paper Covered
Wheel Method) |
| JIS |
K 5600 |
5-9 Testing Methods For Paints - Part 5: Mechanical Property
of Film - Section 9: Abrasion Resistance (Rotating Abrasive Wheel
Method) |
| JIS |
K 5665 |
Traffic Paint |
| JIS |
K 6264 |
2 Rubber, Vulcanized or Thermoplastic - Determination of
Abrasion Resistance - Part 2: Testing Methods |
| JIS |
K 6404 |
22 Testing Methods for Rubber or Plastic Coated Fabrics -
Part 22: Determination of Abrasion Resistance |
| JIS |
K 6902 |
Testing Method for Laminated Thermosetting Decorative Sheets |
| JIS |
K 7204 |
Testing Method for Abrasion Resistance of Plastics by Abrasive Wheels |
| JIS |
L 1021-11 |
Textile floor Coverings - Part 11: Determination of wear |
| JIS |
L 1018 |
Test Methods for Knitted Fabrics |
| JIS |
L 1096 |
Testing for Woven Fabrics |
| JIS |
L 1085 |
Testing Methods for Nonwoven Interlining Fabrics |
| NALFA |
LF-01-2001 |
Laminate Flooring |
| NASTA |
Manufacturing Standards and Specifications for Textbooks |
Specifications for Non-Consumable Soft-Cover Texts - Cover Coating |
| NEMA |
LD3 - 3.13 |
High Pressure Decorative Laminates |
| SAE |
AMS 2438 |
Chromium Coating - Thin, Hard, Dense Deposit |
| SAE |
J 315 |
Fiberboard Test Procedure |
| SAE |
J 365 |
Method of Testing Resistance to Scuffing of Trim Materials |
| SAE |
J 948 |
Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth |
| SAE |
J 1530 |
Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding of Automotive Carpet Materials |
| SAE |
J 1847 |
Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping |
| SAE |
J 2394 |
Seven-Conductor Cable for Abs Power |
| SAE |
J80 |
Abrasion Resistance of Automotive Rubber Mats |
| SIS |
SIS 92 35 09 |
Floor Materials - Determination of Abrasion Resistance |
| SIS |
SS EN 438-2 |
Decorative High Pressure Laminates (HPL); Sheets Based on Thermosetting Resins; Part 2: Determination of Properties |
| SIS |
SN EN 660-2 |
Resilient Floor Coverings - Determination of Wear Resistance - Part 2: Frick-Taber Test |
| SIS |
SS EN 13672 |
Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf |
| SIS |
SS EN 14431 |
Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture |
| SIS |
SS EN 14864 |
Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification |
| SIS |
SN EN ISO 5470-1 |
Rubber or Plastics Coated Fabric-Determination of Abrasion Resistance |
| Tappi |
T 476 |
Abrasion Loss of Paper and Paperboard (Taber-type method) |
| UNI |
UNI EN 660-2 |
Resilient Floor Coverings - Determination of Wear Resistance - Part 2: Frick-Taber Test |
| UNI |
UNI EN ISO 5470 |
Rubber or Plastics Coated Fabric-Determination of Abrasion Resistance |
| UNI |
UNI 9115 |
Furniture: Test for surface finishes.
Behavior of surfaces to wear abrasion. |
| UNI |
UNI 10559 |
Paints and Varnishes; Determination of abrasion resistance by the Taber apparatus. |
| UNI |
UNI EN 13672 |
Surfaces for Sports Areas - Determination of Resistance to Abrasion of Non-Filled Synthetic Turf |
| UNI |
UNI EN 14431 |
Vitreous and Porcelain Enamels - Characteristics of the Enamel Coatings Applied to Steel Panels Intended for Architecture |
| UNI |
UNI EN 14864 |
Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification |
| United Nations |
ECE Regulation 43 |
Uniform Provisions Concerning the Approval of Safety Glazing and Glazing Material |
