|
From
the first Apollo Mission, Taber's heritage continues with field-proven,
long-life performance.
Our New Millennium " Series 2" Pressure
Transducers represent Taber Industries' solution to the space industries'
requirement for Faster, Better, Cheaper Pressure measurement. (Faster
with standard deliveries of just 4 weeks ARO.) Better with
improved accuracy and more options. Cheaper with flight heritage
and complete calibration information for about the cost of a high-end
industrial unit.
Taber's Millennium "Series 2" Models 2211
and 2911 combine the best of the features and capabilities that
were previously sold as stand alone units consolidated into one
common package with an internal RTD added to this package as a standard
feature.
Model
2211
 This small, light weight, flight proven, transducer carries the
distinction of having been assigned Space Shuttle Boeing/Rockwell
ME449 part numbers. Weighing less than 4 ounces, this flight approved
and NASA qualified (to 75 Grms) transducer offers a Low-Level
3mv/v output and an environmental temperature range of -450 deg
F to +400 deg F for cryogenics and high temperature applications.
It's all welded and Stress isolated design ensures a zero defect
solution to the most rugged space vehicle and rocket designs. The
Taber Model 2211 offers 0.20%* FSO static accuracy, 100 ohm Platinum
RTD temperature output and numerous options for flight configuration.
*May vary with Pressure Range
Model
2911
 The High level 0-5 VDC signal output version of the Model 2211.
The addition of the high level module to the low level unit creates
numerous options for the space propulsion designer. Accepting non-regulated
22-36 VDC or optional 10 VDC excitation power, the Model 2911 offers
4 wire isolation or non-isolated signal/power
grounds enabling conformance to all flight bus requirements. Static
accuracy of 0.20%* and RTD temperature output is standard. Improved
accuracy is optional. A 4-20 mA version of this unit
is now being offered - contact your sales agent for information.
*May vary with Pressure Range
Model
2403
The basic staple of the Taber Aerospace product line. This model
presents over 20 years of flight and ground support history on aerospace
programs. The high level isolated 5 Vdc output meets all NASA EMI/RFI
specifications and is presently used on all NASA launch pads. The
flight heritage includes the Delta, Titan, Apollo, and Minuteman
launch vehicles.
Model
2403SAT
The Model 2403SAT was designed for the unique long life demands
required for Satellite propulsion systems. The heritage for this
model utilizes the same aerospace components from the Model 2403
Transducer presently flying on ChinaStar, Clementine, EOS, Landsat,
Wakeshield, Seastar, IndoStar and the  Lockheed
Astro A2100, 7000 platforms. Taber is especially proud that this
model was chosen for the NASA-JPL "Deep Space One" mission,
the first of the NASA Millennium Satellites. Extremely Stable and
with low drift (0.1% over 10 years), Light weight (less than 7 ounces),
and completely designed for Satellite use with 0.25% Static accuracy
and 0.2% (including temperature) option. 1/4" Tube stub, RFI/EMI
461/462D filtering, and RTD temperature output are standard features
for this model.
|
